The J-MAG-C series plug-in electromagnetic flowmeter has the characteristics of high cost-effectiveness and easy installation, and is widely used in the field of large diameter flow measurement. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity; The plug-in installation method eliminates the need for dismantling pipelines for maintenance, making it suitable for on-site use in situations where water cannot be stopped; Bidirectional measurement mode, main variable can be set, not limited by installation direction, three integration modes: forward total, reverse total, and difference total; Self diagnostic function, air traffic control alarm, flow upper and lower limit alarm; The nominal diameter range is wide, suitable for all diameter pipelines between DN100 and DN3000. The sensor adopts advanced processing technology, solid-state packaging, vibration resistance, leakage resistance, long service life, and has good measurement accuracy and stability.
technical parameter
Product Name: Electromagnetic Flowmeter
Structural form: integrated or split type
Connection method: flange ball valve, threaded ball valve
Nominal diameter: DN100~DN3000
Nominal pressure: 1.6MPa
Accuracy level: 1.5% for flow rate ≤ 0.5m/s, 1.0% for flow rate ≥ 1m/s
Medium temperature: -25~40 ℃
Measuring head material: cast aluminum
Body material: SUS304
Electrode material: SUS316L
Output type: 4-20mA, 0-10mA, frequency/pulse, passive contact
Communication type: HART protocol, RS485 communication, RS232 communication
Power supply type: AC220V, 24VDC, 3.6V lithium battery
Protection level: IP65, IP67, IP68
Address: Wangcheng, Changsha, Hunan